Product Center
Product Search
Contact Us
No. 1 Xingye Street, east side of the East Outer Ring Road, north of Chengdong Industrial Street, Leshou Town, Xian County, Cangzhou City, Hebei Province
An experimental study on determining the shear strength of mortar in masonry using the mortar‑mortar shear method during on-site testing. A hydraulic servo system is employed to control the loading rate and display the applied force; the loading speed can be set arbitrarily, and load can be held at any desired level, with a load‑holding function provided.
LSB-2 Type Mortar Concrete Foaming Testing Machine
Voltage: 220 V Air supply pressure: 0.8 MPa Foaming agent aqueous solution consumption: 6 kg Foam settling rate: not greater than 10 mm/hour Water leakage rate: not greater than 80 mL/hour
This mixer is used for testing the strength of wall plastering materials and mortar for brick walls in construction projects, colleges and universities, and research and quality‑inspection departments; it can also be employed by artificial marble manufacturers for blending surface materials and other powdered substances.
CA Mortar Elastic Modulus Tester
It is primarily used to determine the static compressive elastic modulus of prismatic or cylindrical CA mortar specimens. The product complies with the requirements of standards G811971 and GB/T 50081-2002.
JBT-40B Type CA Mortar Standard Curing Box
Power supply: AC 220 V Internal dimensions: 700 × 550 × 1100 mm Temperature control range: Adjustable from 0 to 50°C
CA mortar electric light mixer
Motor power: 1100 W Processing capacity: 2–8 L (water-based medium) Power supply: 220 V, 50 Hz
CA Mortar Xenon Lamp Aging Chamber, Model: SN-900
Temperature and humidity range: RT+10–70°C, 80%–98% RH Temperature fluctuation: ±2°C Rainfall duration: Adjustable from 0 to 60 minutes
GDR3-9 Type CA Mortar Freeze-Thaw Cycling Tester
Temperature range: +20°C to -20°C; minimum temperature inside the chamber ≥ -20.5°C; temperature control accuracy: 1°C.
ZXL-2000 Type Masonry Mortar Strength Point-Load Tester
This instrument has been developed and manufactured in accordance with GB/T 50315-2000, “Technical Standard for On-site Testing of Masonry Works,” and is a specialized device for assessing the strength of masonry mortar. It features direct testing on‑site or in the laboratory without compromising the load‑bearing performance of the wall, and offers easy operation, convenient handling, short testing times, and high measurement accuracy. As such, it fully meets the requirements for quality control in masonry construction and represents an ideal tool for mortar strength testing.
Sampling channels: 2-channel parallel sampling Measurement modes: manual cursor, automatic first‑wave detection; measures acoustic time and two‑dimensional amplitude parameters.