Product Center
Product Search
Contact Us
8616630889368 8615532783686
No. 1 Xingye Street, east side of the East Outer Ring Road, north of Chengdong Industrial Street, Leshou Town, Xian County, Cangzhou City, Hebei Province
SYE-3000BD Electro-Hydraulic Pressure Testing Machine
The SYE-3000BD electro-hydraulic pressure testing machine meets national standards for testing materials such as bricks, concrete, and cement. It features manual loading and an LCD display that shows load, time, and test curves.
SYE-2000A Electro-Hydraulic Pressure Testing Machine
The SYE-2000A electro-hydraulic pressure testing machine meets national standards for testing materials such as bricks, concrete, and cement, featuring manual loading and digital display of both the applied load value and the loading rate.
SYE-3000D Electro-Hydraulic Pressure Testing Machine
The SYE-3000D electro-hydraulic pressure testing machine meets national standards for testing materials such as bricks, concrete, and cement. It features manual loading and digital display of both the applied load value and the loading rate. This is a material testing device.
An experimental study on determining the shear strength of mortar in masonry using the mortar‑mortar shear method during on-site testing. A hydraulic servo system is employed to control the loading rate and display the applied force; the loading speed can be set arbitrarily, and load can be held at any desired level, with a load‑holding function provided.
LSB-2 Type Mortar Concrete Foaming Testing Machine
Voltage: 220 V Air supply pressure: 0.8 MPa Foaming agent aqueous solution consumption: 6 kg Foam settling rate: not greater than 10 mm/hour Water leakage rate: not greater than 80 mL/hour
This mixer is used for testing the strength of wall plastering materials and mortar for brick walls in construction projects, colleges and universities, and research and quality‑inspection departments; it can also be employed by artificial marble manufacturers for blending surface materials and other powdered substances.
CA Mortar Elastic Modulus Tester
It is primarily used to determine the static compressive elastic modulus of prismatic or cylindrical CA mortar specimens. The product complies with the requirements of standards G811971 and GB/T 50081-2002.
JBT-40B Type CA Mortar Standard Curing Box
Power supply: AC 220 V Internal dimensions: 700 × 550 × 1100 mm Temperature control range: Adjustable from 0 to 50°C
CA mortar electric light mixer
Motor power: 1100 W Processing capacity: 2–8 L (water-based medium) Power supply: 220 V, 50 Hz
CA Mortar Xenon Lamp Aging Chamber, Model: SN-900
Temperature and humidity range: RT+10–70°C, 80%–98% RH Temperature fluctuation: ±2°C Rainfall duration: Adjustable from 0 to 60 minutes