Product Center
Product Search
Contact Us
8616630889368 8615532783686
No. 1 Xingye Street, east side of the East Outer Ring Road, north of Chengdong Industrial Street, Leshou Town, Xian County, Cangzhou City, Hebei Province
SYE-3000D Electro-Hydraulic Pressure Testing Machine
The SYE-3000D electro-hydraulic pressure testing machine meets national standards for testing materials such as bricks, concrete, and cement. It features manual loading and digital display of both the applied load value and the loading rate. This is a material testing device.
HYE-3000BD Microcomputer-Controlled Electro-Hydraulic Servo Pressure Testing Machine
The HYE-3000BD electro-hydraulic servo pressure testing machine can set the loading rate in accordance with the relevant national standards and, by meeting the standard‑specified loading‑rate control requirements, perform compressive strength tests on materials such as cement and concrete under the rated test force.
YAW-3000 Microcomputer-Controlled Electro-Hydraulic Servo Pressure Testing Machine
The YAW-3000 electro-hydraulic servo universal testing machine is a high-precision materials-testing device that employs a hydraulic power source, electro-hydraulic servo control technology, and computer-based data acquisition and processing, enabling closed-loop control and automated testing.
GDR3-9 Type CA Mortar Freeze-Thaw Cycling Tester
Temperature range: +20°C to -20°C; minimum temperature inside the chamber ≥ -20.5°C; temperature control accuracy: 1°C.
ZXL-2000 Type Masonry Mortar Strength Point-Load Tester
This instrument has been developed and manufactured in accordance with GB/T 50315-2000, “Technical Standard for On-site Testing of Masonry Works,” and is a specialized device for assessing the strength of masonry mortar. It features direct testing on‑site or in the laboratory without compromising the load‑bearing performance of the wall, and offers easy operation, convenient handling, short testing times, and high measurement accuracy. As such, it fully meets the requirements for quality control in masonry construction and represents an ideal tool for mortar strength testing.
Ultrasonic Cleaning Bath for CA Mortar Model: CAXY-10L
Operating frequency: 35 kHz, 53 kHz Rated power / Capacity: 250 W, 10 L
NLD-4 Type CA Mortar Dry-Mix Flowability Tester
It is primarily used to determine the flow value of cement mortar and complies with the requirements of GB/T 2419-2004.
CA Mortar Xenon Lamp Aging Chamber, Model: SN-900
Temperature and humidity range: RT+10–70°C, 80%–98% RH Temperature fluctuation: ±2°C Rainfall duration: Adjustable from 0 to 60 minutes
This mixer is used for testing the strength of wall plastering materials and mortar for brick walls in construction projects, colleges and universities, and research and quality‑inspection departments; it can also be employed by artificial marble manufacturers for blending surface materials and other powdered substances.
CA Mortar Elastic Modulus Tester
It is primarily used to determine the static compressive elastic modulus of prismatic or cylindrical CA mortar specimens. The product complies with the requirements of standards G811971 and GB/T 50081-2002.
Sampling channels: 2-channel parallel sampling Measurement modes: manual cursor, automatic first‑wave detection; measures acoustic time and two‑dimensional amplitude parameters.
JBT-40B Type CA Mortar Standard Curing Box
Power supply: AC 220 V Internal dimensions: 700 × 550 × 1100 mm Temperature control range: Adjustable from 0 to 50°C